Smoothing Profiling Tool for stone – T30R3 Position 2
This CNC tool executes the stone smoothing by removing the slab’s roughness. Additionally, the T30R3 profiling tools for stone maintains the the geometry of the profile even on very hard materials such as stone. This result is due to the use of materials such as the steel core of the T30R3 Stone Smoothing tool. The electrolytic process that is used to to lay ther diamond powder also contributes to the results of the tool. It is very important that this tools is used before passing to the rectifying phase.
Main Characteristics
The characteristics of the T30R3 for smoothing stone are:
- Perfect Profile Geometry
- Long Life Abrasive Power
- Excellent Preparation for the Finishing Phase
Like other diamond tools such as core bits and granite diamond blades, this tools has specifications. The following tables provide you with the measurements of the T30R3 Stone Smoothing wheel and the specification of the Stone profiling wheels wheels respectively.
| Max D | 74mm | ![]() |
|---|---|---|
| Min D | 60mm | |
| Height | 46mm | |
| Rad | 3mm | |
| Bore | 35mm |
| Position | Stock Removal | Rotating Speed | Feed Rate mm/min | Feed Rate inch/min |
|---|---|---|---|---|
| 0G | 0 | 5500 RPM | 800-4000 mm/min | 32-160 inch/min |
| 1G | 0 | 5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 2MG | 0.019 inch (0.5 mm) | 5500 RPM | 800-4000 mm/min | 32-200 inch/min |
| EXC3 | 0.011 inch (0.3 mm) | 5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 4 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 5 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 6 | 0.0019 inch (0.05 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
- First Position T30R3
- Second Position T30R3
- Third Position T30R3
- Fourth Position T30R3
- Fifth Position T30R3
- Sixth Position T30R3
