T20R5 Position 2 1/2 Gas Stone Smoothing Tool
This T20R5 Position 2 1/2 Gas CNC tool executes the stone smoothing by removing the slab’s roughness. Additionally, the T20R5 profiling tools for stone work on very hard materials such as granite or engineered stone. This result is due to the use of materials such as the steel core of the T20R5 Stone Smoothing tool. The electrolytic process that is used to lay the diamond powder also contributes to the results of the tool. It is very important that this tools is used before passing to the rectifying phase.
Main Characteristics
The characteristics of the T20R5 for smoothing marble/granite are:
- Perfect Profile Geometry
- Long Life Abrasive Power
- Excellent Preparation for the Finishing Phase
The following tables provide you with the measurements of the T20R5 Marble/Granite Smoothing bit and the specification of the marble/granite profiling bits respectively.
T20R5 Specifications
| Max D | 33mm | ![]() |
|---|---|---|
| Min D | 20mm | |
| SM | 5mm | |
Marble/Granite Profiling Wheels
| Position | Stock Removal | Rotating Speed | Feed Rate mm/min | Feed Rate inch/min |
|---|---|---|---|---|
| 0G | 0 | 5500 RPM | 800-4000 mm/min | 32-160 inch/min |
| 1G | 0 | 5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 2MG | 0.019 inch (0.5 mm) | 5500 RPM | 800-4000 mm/min | 32-200 inch/min |
| EXC3 | 0.011 inch (0.3 mm) | 5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 4 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 5 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 6 | 0.0019 inch (0.05 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
