H25+5+3R25 Position 3 Granite Finishing Tool
The H25+5+3R25 tool executes the finishing phase on the granite. This phase plays a vital role in the slab’s working process and is important to obtainingan excellent final result since it is the bridge between the grinding process and the polishing process.
The H25+5+3R25 Position 3 for granite has a steel core with high tolerance. the extra-fine abrasive diamond powderis laid through a an electroplating process at high density. This results in a granite finishing tool with extreme stiffness and an excellent finishing of the profile, preparing it for the polishing phase of the process.
Main Characteristics
The following features of the H25+5+3R25 tools are as follows:
- Finishing of the Profile Geometry
- Perfect Finishing of the Profile
- Optimization for the Polishing Phase
The following tables provide you with the measurements of the H25+5+3R25 Granite Finishing wheel and the specification of the granite profiling wheels wheels respectively.
| Max D | 120mm |  |
|---|---|---|
| Min D | 70mm | |
| Height | 42mm | |
| Rad A | 25mm | |
| Rad B | 2mm | |
| Bore | 35mm |
| Position | Stock Removal | Rotating Speed | Feed Rate mm/min | Feed Rate inch/min |
|---|---|---|---|---|
| 0G | 0 | 5500 RPM | 800-4000 mm/min | 32-160 inch/min |
| 1G |
0 |
5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 2MG | 0.019 inch (0.5 mm) | 5500 RPM | 800-4000 mm/min | 32-200 inch/min |
| EXC3 | 0.011 inch (0.3 mm) | 5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 4 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 5 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 6 | 0.0019 inch (0.05 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |