A30R5 HG Position 1 Profiler
This CNC tool executes the stone grinding to prepare the slab for the the following smoothing phase. This is due to the high performance in terms of cutting speed, and removal capacity supplied by the patented interchangeable sectors of the A30R5 HG Position 1 Profiler Grinding Bit.
Like other diamond tools such as core bits and granite diamond blades, this tools has specifications. The following tables provide you with the measurements of the A30R5 Stone Grinding bit and the specification of the stone profiling bits respectively.
A30R5 Specifications
| Max D | 34mm | ![]() |
|---|---|---|
| Min D | 20mm | |
| Rad | 5mm | |
Stone Profiling Bits
| Position | Stock Removal | Rotating Speed | Feed Rate mm/min | Feed Rate inch/min |
|---|---|---|---|---|
| 0G | 0 | 5500 RPM | 800-4000 mm/min | 32-160 inch/min |
| 1G | 0 | 5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 2MG | 0.019 inch (0.5 mm) | 5500 RPM | 800-4000 mm/min | 32-200 inch/min |
| EXC3 | 0.011 inch (0.3 mm) | 5500 RPM | 800-5000 mm/min | 32-200 inch/min |
| 4 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 5 | 0.003 inch (0.1 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
| 6 | 0.0019 inch (0.05 mm) | 3000 RPM | 600-5000 mm/min | 24-200 inch/min |
A30R5 1/2 Gas Available Positions
- First Position A30R5 Half Gas
- Second Position Half Gas
- Third Position Half Gas
- Fourth Position Half Gas
- Fifth Position Half Gas
- Sixth Position Half Gas
